|
RAID Disk
Arrays: Stratis Specifications
Management
Distributed
Array Management (DAM) software allows the user to easily
monitor and configure the SRF116/SRF216.
Arrays can be configured and monitored using a
simple graphical representation.
DAMwatch is a monitoring service, included in the
DAM software, that warns users of any errors with the RAID
arrays, disk drives, and/or enclosure components.
| General
Description
|
| Number
of Fibre Channel drives supported:
|
16 per enclosure
|
| External
Host Fibre Channel interface:
|
Small Form-Factor Pluggable
(SFP)
|
| RAID
controller:
Management
configuration interface:
Device
types supported:
Hot
pluggable components:
|
FFx-2
3.5 mm jack
FC-AL drives to 15 K RPM
PSU, cooling module, disk drives, I/O modules, RAID
controller
|
| Physical
and Environmental Specifications
|
| Dimensions:
|
3U - 134 mm (height), 446 mm (width), 500 mm
(depth)
|
| Weight:
|
Overall weight 35 kg (weight with all modules
except drives 15.5 kg)
|
| Power:
Power
frequency:
Power
consumption:
Temperature
Operational:
Altitude:
|
Voltage: 110 to 260 V AC
Single Phase 48-62 Hz or
-48 VDCC
Max 450 W
10º C to 40º C, 20 to 80% Humidity
Operating: 0 to 3047 m (0 to 10,000 ft). Non
operating:
Shock
and vibration:
Operational Shock: 5 g 10 ms 1/2 Sine.
Operational vibration: 0.21 grms
5-500 Hz random.
Non-operating shock: 30 g 10 ms 1/2 Sine. Non-operating vibration: 1.04 grms 2-200 Hz random.
Relocation vibration: 0.3 g 2-200 Hz Sine.
|
| Acoustics
- at ambient 20º C:
|
Less than 6.0 B LwA @ 20º C
|
| Warranty:
|
Three year return to factory
|
| RAID
Controller Technical Specifications
|
| Host/device
burst data rate:
Host
interface number of channels:
|
2
Gbit/sec Fibre Channel
Two 2
Gbit/sec Fibre Channel
|
| Device
interface number of channels:
|
Two 2
Gbit/sec FC-AL
|
| Protocol:
|
FC-AL and Fabric
|
| Advanced
RAID features: |
| Host
independent, host-independent/transparent failover/failback,
write-back
/ write-through battery backed cache, online array
initialization,
online capacity expansion, spare pooling and dedicated
spares, automatic
reconstruct, parity verification, hot-swap support for
controllers and drives,
array status monitoring, adjustable RAID stripe width,
automatic sector
remapping, user-settable priority for array reconstruct,
verify, create, and expand
operations. Arrays
can be configured for RAID levels 0, 1, 3, 4, 5, 10, 50,
JBOD.
Up to 32 LUNs per active-active pair.
Advanced hardware features: 512
MB of PC-133-compatible SDRAM DIMM, ECC protected 4 MB of
ECC-protected SDRAM processor memory.
Integrated cache battery backup
interface. Flash
upgradable firmware.
|
| Configuration
and management: |
| Terminal
based RS-232 serial interface for local management.
Support
for Distributed Array Management (DAM) software over Fibre
Channel
with easy-to-use graphical representation with complete
configuration and
monitoring capabilities.
|
|
